ANY QUESTIONS? LET'S TALK

Icarus

New member
Customer
Feb 26, 2022
1
1
3
Hi,

Maybe you want to become my client and you have questions, please ask those questions here.

Please keep your question brief and as informative as possible.
Hi Jared, can you please post account types and settings for the Telegram results you share? Thank you.
 
  • Like
Reactions: Kamran razzaq

mreams

New member
Customer
Jul 10, 2022
19
1
3
Langley BC Canada
Jarod, I have found some things that do not work and a couple questions I have. Can you please address them all individually please.

1> The news filter does not work. The times of the news events are off by 3 hours. Adjusting the setting for your time zone makes no difference. When will this be fixed?

2> I was testing all 3 modes, and when using the mode_sclaping_ave mode on default settings no second trade was taken after 5 pips of drawdown as per the setting. It went all the way to the 70 pip stop loss then closed the trade without opening a single cost averaging trade.

3> The scheduler sort of works. Under the experts tab I can see it say "Trading Disabled by Scheduler" and "is time to close all positions" I did a test, I opened a small trade manually but the EA never closed it when the time for the Close Positions Hour setting was matched. It should have closed this trade.

4>Under the Trade Order section for the Take_Profit andStop_loss it says "//ignore if Use Locks = true" What are "Locks"? I do not see another setting for "Locks"

5>Is the "VT_Trail_if Rollback is more then" setting only used if the the VirtualTakeType is set to VT_Dynamic? (This is a yes or no question)
 

mreams

New member
Customer
Jul 10, 2022
19
1
3
Langley BC Canada
For the scalping_hedge mode, should it open a buy and sell every time. I have many trades that only opens a single trade in 1 direction only. Sometimes it does open a trade then an opposite trade shortly after.
 
Last edited:

mreams

New member
Customer
Jul 10, 2022
19
1
3
Langley BC Canada
In my journal tab is says "trading has been enabled - hedging mode" The problem is I am using Mode_scalping. Is this an error? See attached
 

Attachments

  • mode.jpg
    mode.jpg
    57.8 KB · Views: 18

mreams

New member
Customer
Jul 10, 2022
19
1
3
Langley BC Canada
See attached for a screenshot of my expert tabs.. Top half of the picture is Fusion Markets. Bottom half is FTMO. Exact same settings, same trade. Why does the Fusion Markets not show the Open position Sell order with slippage line?
 

Attachments

  • Info.jpg
    Info.jpg
    43.8 KB · Views: 22
Last edited:

mreams

New member
Customer
Jul 10, 2022
19
1
3
Langley BC Canada
On another account I have running 6 pairs in the experts tab it only stops trading and closes positions on 3 pairs. So what about the other 3 pairs? Also why did it not reconnect to the server after the specified times in the settings?
 

Attachments

  • schedualer.jpg
    schedualer.jpg
    42.3 KB · Views: 15

Jared

Administrator
Staff member
Feb 11, 2012
256
60
28
elm-ea.com
Jarod, I have found some things that do not work and a couple questions I have. Can you please address them all individually please.

1> The news filter does not work. The times of the news events are off by 3 hours. Adjusting the setting for your time zone makes no difference. When will this be fixed?

2> I was testing all 3 modes, and when using the mode_sclaping_ave mode on default settings no second trade was taken after 5 pips of drawdown as per the setting. It went all the way to the 70 pip stop loss then closed the trade without opening a single cost averaging trade.

3> The scheduler sort of works. Under the experts tab I can see it say "Trading Disabled by Scheduler" and "is time to close all positions" I did a test, I opened a small trade manually but the EA never closed it when the time for the Close Positions Hour setting was matched. It should have closed this trade.

4>Under the Trade Order section for the Take_Profit andStop_loss it says "//ignore if Use Locks = true" What are "Locks"? I do not see another setting for "Locks"

5>Is the "VT_Trail_if Rollback is more then" setting only used if the the VirtualTakeType is set to VT_Dynamic? (This is a yes or no question)
Hi ! How are you doing ?

Much more effective to communicate in a personal chat in Telegram, on the forum, I am often, but to answer all the time is not realistic.

Let me answer your questions:)

1) Please link to the documentation (my post - https://globalforexforum.com/threads/changelog-and-upgrades.225/post-8227).

2) All modes have been tested hundreds of times, thousands of customers. All should be fine. Perhaps you made a mistake in the settings. The algorithm works without errors. This is a pre-programmed code, it cannot make mistakes.

3) The EA does not manage the orders opened manually, only those that are opened by it. It is strongly recommended not to interfere in the work of the EA

4) Last version had this parameter, now it is not.

5) Dynamic TP shows worse results, than the pre-installed one. It is better to work with preinstalled
 

Jared

Administrator
Staff member
Feb 11, 2012
256
60
28
elm-ea.com
For the scalping_hedge mode, should it open a buy and sell every time. I have many trades that only opens a single trade in 1 direction only. Sometimes it does open a trade then an opposite trade shortly after.
I need to see the logs of your trades to give you an answer, but I'm more than sure that there is no problem with the functionality of my algorithm. Everything is working according to the clearly defined conditions.
 

Jared

Administrator
Staff member
Feb 11, 2012
256
60
28
elm-ea.com
What is the difference from "Max Execution Slippage" setting and "OrderOpenSlippage" setting?
The difference is in the following:

- Max Execution Slippage - If the slippage in the last deal is higher than the specified value, then the trade will be stopped.

- Order Open / Close Slippage - this function works only on accounts with instant execution. It allows specifying slippage parameters at opening and closing of deals. Otherwise, a requote will be received.
 

Jared

Administrator
Staff member
Feb 11, 2012
256
60
28
elm-ea.com
In my journal tab is says "trading has been enabled - hedging mode" The problem is I am using Mode_scalping. Is this an error? See attached
Try to change the ELM_EA mode again and reboot your trading platform. Not sure what your problem is, I think I can connect to your server and help you with the configuration, if you have the need.

For more accurate information, please contact me personally @develonbot
 

dbBB

New member
Customer
Oct 10, 2022
3
0
1
Hi,

I installed the system on my MT4 and MT5 but I have information that password or login to license server is wrong. You can see the screenshot what exactly I saw and help me solve this problem?
 

Attachments

  • problem with password.jpg
    problem with password.jpg
    696.1 KB · Views: 16

Jared

Administrator
Staff member
Feb 11, 2012
256
60
28
elm-ea.com
Hi,

I installed the system on my MT4 and MT5 but I have information that password or login to license server is wrong. You can see the screenshot what exactly I saw and help me solve this problem?
I think you wrote everywhere, but not me personally telgram- @develonbot

why so much spam?
 

Chamkesh

New member
Feb 19, 2023
1
0
0
I would like to buy your EA but I have a few questions before buying it.

Can you provide a real account myfxbook link, as all I found are either screenshots or some opened with your site's WP plugin. If you provide an actual link to myfxbook, it will be very easy for me to make a purchase decision.

Thank You.
 

Ahmad

New member
Customer
Feb 12, 2020
14
1
3
I would like to buy your EA but I have a few questions before buying it.

Can you provide a real account myfxbook link, as all I found are either screenshots or some opened with your site's WP plugin. If you provide an actual link to myfxbook, it will be very easy for me to make a purchase decision.

Thank You.
Aloha buddy, let me ask you, what's wrong with the results that Jared presents in his telegram channel and website? Compared to other bots that I bought over the past 5 years, this project seemed to me the most open. Great tech support and a lot of information about the bot on the forum. I have not seen that before ...

I do not have a lot of people who care about their customers and show the password to the investor from the real account. It's pretty strong that the results are confirmed not only by a screenshot, but also by the investor's password. After all, this is really rare and proof.

When I saw your post buddy, I really wondered if I did the right thing when I bought the Pro version. But then I thought about it, weighed all my thoughts and looked at my account and realized it was okay ! I tried to put my thoughts out there to help you somehow.
But it's up to you anyway:cool:
 

Attachments

  • scrennn.png
    scrennn.png
    46.6 KB · Views: 6

zombie

Member
Customer
Jan 20, 2014
43
8
8
Hi guys, do you mind if I join your conversation and also share my opinion about the purchase? For me, purchasing a licensed version was the right decision. After 4 months after the purchase, I'm only more and more convinced of this. I have no claims to the developer. The algorithm works clearly and precisely. I am satisfied with the quantity and quality of transactions. I'm glad I bought this advisor.
P.S.
Before buying, it is advisable to use a demo to check the performance of the algorithm.